
| SiteId | Sku | UnitPrice | Link |
|---|---|---|---|
| 48585 | 570686572 | 339 | More Info |
This product comes with a 3 Years warranty.
The HD3 premium powered speakers are a mini home music system with high-fidelity stereo sound for smaller spaces and desktops. Wired or wireless connections, including USB audio from your computer, extended-range wireless aptX-HD Bluetooth from your phone, or good old analogue from that vintage turntable or 80’s Sony tape deck.
Audioengine's most-versatile wireless Bluetooth speakers. HD3 Wireless Speakers work with all your apps, music, and devices so no matter how you listen, HD3 has you covered. The ultimate mini music system with wireless that works.
Tidal, Spotify, Pandora…all your favourite streaming apps play instantly.
Small speakers with a big sound to fill any room. Extended-range wireless aptX-HD Bluetooth. High-end sound wrapped in hand-built wood cabinets. Simple setup, no receiver needed. No network setup, no passwords, no hassle. No buttons to push & inputs are always ready to go. Front panel volume control and headphone jack.
The HD3 Wireless Speakers are small desktop speakers with a surprisingly large sound for their size. No network setup, passwords to enter, or buttons to push. Setting up these speakers is so easy you’ll be rocking in no time.
Keep your music fun, easy, and sounding great.
Don’t let their size fool you as this little speaker is packed with much more sound than you would expect. The HD3 Wireless Speakers are constructed with custom Audioengine components: aramid fiber woofers, silk tweeters, aptX HD Bluetooth, and built-in power amps wrapped in precision-tuned, hand-crafted cabinets. Clear, full and powerful audio that fills almost any room.
Audioengine wireless speakers are special. Their built-in analog power amplifiers sound incredible compared to lower-cost digital amps found in other mass-produced brands.
A whole new music experience, guaranteed.
HD3 | |
|---|---|
| Type | Powered Bluetooth aptX HD speaker system |
| Amplifier Type | Class AB |
| Power Output | 61 W peak power total (15 W RMS / 30 W peak per channel), AES |
| Drivers |
2.75” aramid aramid fiber woofers 0.75″ silk dome tweeters |
| Inputs | 3.5 mm stereo mini-jack, RCA L/R, USB, Bluetooth |
| Outputs | RCA variable line-out, 3.5 mm mini-jack headphone out |
| Input Voltages | 110-240 V 50/60 Hz auto-switching |
| SNR | >95 dB (typical A-weighted) |
| THD+N | <0.05% at all power settings |
| Crosstalk | <50 dB |
| Frequency Response | 65 Hz-22 kHz ±2.0 dB |
| Input Impedence | 5K ohms unbalanced |
| Protection | Output current limiting, thermal over-temperature, power on/off transient protection |
| Power Consumption | Idle: 10 W |
| |
| Internal D/A Converter | PCM 5102 |
| Input Bit Depth | 24 bit (padded) |
| Bluetooth Receiver Type | Bluetooth 5.0 |
| Supported Codecs | aptX HD, aptX, AAC, SBC |
| Wireless Operation Range | Up to 100 ft (30 m) typical |
| Input Data Rate | Determined by Bluetooth |
| Wireless Latency | ~30 milliseconds (ms) |
| |
| Connector Type | Micro-USB |
| USB Device Class | USB 1.1 or above |
| Input Bit Depth | 24 bit (padded) |
| Input Sample Rate | 44.1 kHz/48 kHz |
| |
| Headphone Amp Type | OPA2134 |
| Full-scale Headphone Output Level | 2.0 V RMS |
| Output Impedence | 2 ohms |
| Recommended Headphone Impedence Level | 10 ohms to 10K ohms |
| |
| Dimensions | Each speaker – 7″(17.8 cm) x 4.25″ (10.8 cm) x 5.5″ (14 cm) |
| Weight |
Left (powered) – 4 lb (1.8 kg) Right (passive) – 3.4 lb (1.5 kg) |
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Returns are accepted. Items must be returned within 30 days of the auction ending. Buyer will pay for return shipping.