Power Probe 3 & Multimeter Twin Pack
The Power Probe Professional Electrical Test Kit provides the circuit
testing ability of the Power Probe 3 combined with the diagnostic
capabilities of the Power Probe Digital Multimeter.
Features
PP3
-DC Voltmeter Indicators provide active feedback
-LED Lights
-Bad Ground Indicator
-Short Circuit Indicator
-Relay and Component Tester
-Audible Monitoring of Electrical Signals
PPDMM
-CAT-IV 600V hybrid safe rating
-Digital Volt and Ohmmeter for circuit testing
-Measures Frequency for Sensor Testing
-Included K-Type Temp Probe allows for temperature readings
Specifications
PP3
- DC 0 – 70V + 1 digit
- P-P 0 – 70V
Frequency response of tone pass through
- 10Hz to greater than 10 Khz
PP display
- 15Hz Square Wave
- 35Hz Sine Wave
Power Probe Mode
– Continuity to ground
- First level – display is enabled less than 20K
- Second level – green LED is enabled less than 2K
– & + Peak Detector Response
- Single event capture less than 200μs pulse width
- Repetitive events less than 1μs pulse width
Peak to Peak Mode
- 0 – 70V + 1 digit
- 4Hz to over 500kHz Square Wave input
- 4Hz to over 250kHz Sine Wave input
-Threshold for PPAC/Audible passthrough
Circuit Breaker
-8 amp thermal response – Manual reset
PPDMM
-Operating Altitude : 2000m
-Relative Humidity : 75% max operating
-Operating Temperature : 0°C~40°C/32°F~104°F (<80% RH)
-Storage Temperature : -10°C~60°C/14°F~140°F (<70% RH)
-Accuracy Temperature : -18°C~28°C/64°F~82°F (<80% RH)
-Temperature Coefficient : 0.1x(specified accuracy)/°C (<18°C or
>28°C)
-Sampling Frequency : approx. 3 times/sec.
-Fuse Protection : μA/mA input: F600mA/600V 10A input: F10A/600V
-DC/AC Voltage : 600V
-DC/AC Current : 10A
-Resistance : 60MΩ
-Capacitance : 60mF
-Frequency : 10kHz
-Diodes : 2.7V
-Continuity : <50Ω
-Temperature : -20°C~1000°C/-4°F~1832°F
-LCD Display : 3 ¾ digit display (6000 counts)
-Product Supply : 3x1.5V AAA batteries
-Product Size : 160mmx74mmx49mm / 6.3"x2.9"x1.9"
-Product Weight : 482g / 1.06lb
-Safety Rating : CAT IV 600V
-Safety Standards : IEC61010-1
-Pollution Degree : 2
-Accuracy : ±(of reading + # of least significant digits)
|
|
|
